B&B Electronics SPPXP-100 - Manual - Manual (Page 8)

Installing the software ExpressCard Parallel Port Adapter User’s Manual
Page 4 Rev 1.00 (July 2007)
Figure 3 - Windows XP “software has not passed Windows logo testing” prompt
Step Procedure Description

Step 8 In the case of a new unsigned driver, the
“software has not passed Windows logo
testing” prompt will appear. Please click
the [Continue Anyway] button to continue
with the installation. Windows displays a warning prompt if
the software drivers are not signed with
the Windows logo. New drivers have
been tested at our lab facilities, but may
not yet have received the official logo
from Microsoft.

Step 9 The Wizard locates and starts to install
the necessary software. The “wait while the Wizard installs the
software” prompt displays (fig.4),
followed by the “Finished installing”
prompt (fig.5).
Figure 3 illustrates the
“software has not passed
Windows logo testing” prompt.
This prompt will only appear
in the case of a new unsigned
driver.