B&B Electronics SL2736-698 - Quick Start Guide - Manual (Page 2)

Installation Steps Summary
Installing the Serial I/O Card takes just a few easy steps that vary depending
on the version of your card and the operating system of your mobile
computer.
Pocket PCs, Other Windows CE Devices, Windows Notebooks
STEP 1: If using the standard S-I/O, attach the cable to the card.
STEP 2: Insert the card into your mobile computer.
STEP 3: If necessary, install the software.
DOS Notebooks
STEP 1: If using the standard S-I/O, attach the cable to the card.
STEP 2: Install the software.
STEP 3: Insert the card.
Note: If you want to use the S-I/O with a DOS application on a Windows
notebook, in most cases you only need to install the S-I/O for your Windows
version, not for DOS. Refer to the guidelines on the back page for “Using a
DOS Application on a Windows Notebook.”