Rainbow Electronics MAX913 - Manual (Page 6)

MAX912/MAX913
Single/Dual, Ultra-Fast, Low-Power,
Precision TTL Comparators
6 _______________________________________________________________________________________
____________________________________________________________Pin Descriptions
PIN
MAX912
NAME FUNCTION
1 QA Comparator A TTL output
2
–
Q
–
A Comparator A complementary TTL output
3, 14 GND Logic ground. Connect both GND pins to ground.
4 LEA
5, 12 N.C. Not internally connected
6 V-
Negative power supply: -5V for dual supplies (bypass to GND with a 0.1µF capacitor), or GND for a
single supply
7 INA- Comparator A inverting input
8 INA+ Comparator A noninverting input
9 INB+ Comparator B noninverting input
10 INB- Comparator B inverting input
11 V+ Positive power supply, +5V. Bypass to GND with a 0.1µF capacitor.
13 LEB
15
–
Q
–
B Comparator B complementary TTL output
16 QB Comparator B TTL output
PIN
MAX913
NAME FUNCTION
1 V+ Positive power supply. Bypass to GND with a 0.1µF capacitor.
2 IN+ Noninverting input
3 IN- Inverting input
4 V-
Negative power supply: -5V for dual supplies (bypass to GND with a 0.1µF capacitor), or GND for a
single supply
5 LE
6 GND Logic ground
7 Q TTL output
8
–
Q
–
Complementary TTL output
Comparator A latch enable. QA and
–
Q
–
A are latched when LEA is high or floating.
Comparator A latch is transparent when LEA is low.
Comparator B latch enable. QB and
–
Q
–
B are latched when LEB is high or floating.
Comparator B latch is transparent when LEB is low.
Latch enable. Q and
–
Q
–
are latched when LE is TTL high or floating. The comparator latch is
transparent when LE is low.