beautypg.com

Rainbow Electronics MAX4163 User Manual

General description, Applications, Features

background image

General Description

The MAX4162/MAX4163/MAX4164 are single/dual/quad,
micropower operational amplifiers that combine an
exceptional bandwidth to power consumption ratio with
true rail-to-rail inputs and outputs. They consume a
mere 25µA quiescent current per amplifier, yet achieve
200kHz gain-bandwidth product and are unity-gain
stable while driving any capacitive load. The MAX4162/
MAX4163/MAX4164 operate from either a single supply
(2.7V to 10V) or dual supplies (±1.35V to ±5V), with an
input common-mode voltage range that extends 250mV
beyond either supply rail. These amplifiers use a propri-
etary architecture to achieve a very high input common-
mode rejection ratio without the midswing nonlinearities
present in other Rail-to-Rail

®

op amps. This architec-

ture also maintains high open-loop gain and output
swing while driving substantial loads.

The combination of excellent bandwidth/power perfor-
mance, single-supply operation, and miniature footprint
makes these op amps ideal for portable equipment and
other low-power, single-supply applications. The single
MAX4162 is available in 8-pin SO and space-saving
5-pin SOT23 packages. The MAX4163 is available in an 8-
pin ultra chip-scale package (UCSP™) and an 8-pin µMAX
or SO package. The MAX4164 is available in a 14-pin SO
package.

________________________Applications

Battery-Powered Devices

Medical Instruments

pH Probes

Ionization Detectors

Portable Equipment

Cellular Phones

Low-Power, Low-Voltage
Equipment

Features

UCSP Package (MAX4163)
1.0pA Typical Input Bias Current
Single-Supply Operation from 2.7V to 10V
Input Common-Mode Voltage Range Extends

250mV Beyond Either Supply Rail

Rail-to-Rail Output Swing
200kHz Gain-Bandwidth Product
25µA Quiescent Current per Amplifier
Excellent CMRR, PSRR, and Gain Linearity
No Phase Reversal for Overdriven Inputs
Unity-Gain Stable
Stable with Any Capacitive Load
Internally Short-Circuit Protected to Either Rail

MAX4162/MAX4163/MAX4164

UCSP, Micropower, Single-Supply, 10V,

Rail-to-Rail I/O Op Amps

________________________________________________________________ Maxim Integrated Products

1

MAX152

1/2 MAX4163

1/2 MAX4163

MAX6120

MICROPOWER

±1.2V REFERENCE

V

REF+

V

DD

V

DD

V

DD

V

SS

V

SS

R

V

SS

-1.2V

+1.2V

V

OUT

V

OUT

GND

V

IN

3V

IN+

IN-

R

IN-

IN+

V

OUT

-3V

V

REF-

Typical Application Circuit

Pin Configurations

19-1195; Rev 1; 3/02

PART

MAX4162ESA

-40°C to +85°C

TEMP

RANGE

PIN-
PACKAGE

8 SO

Ordering Information

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

TOP

MARK

TOP VIEW

TOP VIEW (BUMPS SIDE DOWN)

V

SS

IN-

IN+

1

5

V

DD

OUT

MAX4162

MAX4163

SOT23

2

3

4

A

B

C

1

2

3

OUTA

V

DD

OUTB

INA-

INB-

INB+

V

SS

INA+

UCSP (B9-2)

MAX4162EUK-T

-40°C to +85°C

5 SOT23-5

AABX

MAX4163EBL-T* -40°C to +85°C

8 UCSP-8

AAX

MAX4163EUA

-40°C to +85°C

8 µMAX

Pin Configurations continued at end of data sheet.

*UCSP reliability is integrally linked to the user’s assembly
methods, circuit board material, and environment. Refer to the
UCSP Reliability Notice in the UCSP Reliability section of this
data sheet for more information.

MAX4164ESD

-40°C to +85°C

14 SO

Rail-to-Rail is a registered trademark of Nippon Motorola Ltd.
UCSP is a trademark of Maxim Integrated Products, Inc.

MAX4163ESA

-40°C to +85°C

8 SO