Rainbow Electronics AT90SC9618RT User Manual
Features, General, Peripherals
6555AS–SPD–15May07
Features
General
•
High-performance, Low-power secureAVR
™
RISC Architecture
– 135 Powerful Instructions (Most Executed in a Single Clock Cycle)
•
Low Power Idle and Power-down Modes
•
Bond Pad Locations Conforming to ISO 7816-2
•
ESD Protection to ± 6000V
•
Operating Ranges: 1.62 to 5.5V
•
Compliant with GSM, 3GPP and EMV 2000 Specifications; PC Industry Compatible
•
Available in Wafers, Modules, and Industry-standard Packages
Memory
•
96K Bytes of ROM Program Memory plus 32KBytes of ROM with specific access
•
18K Bytes of EEPROM, Including 128 OTP Bytes and 384-byte Bit-addressable Area
– 1 to 64-byte Program / Erase
– 2 ms Program / 2 ms Erase
– Typically More than 500,000 Write/Erase Cycles at a Temperature of 25
o
C
– 10 Years Data Retention
•
4K Bytes of RAM
Peripherals
•
One ISO 7816 Controller
– Up to 625 kbps at 5 MHz
– Compliant with T=0 and T=1 Protocols
•
One I/O Port
•
Programmable Internal Oscillator (up to 20 MHz for Internal CPU Clock)
•
Two 16-bit Timers
•
Random Number Generator (RNG)
•
2-level, 7-vector Interrupt Controller
•
Hardware DES and Triple DES DPA Resistant
•
Checksum Accelerator
•
CRC 16 & 32 Engine (Compliant with ISO/IEC 3309)
Security
•
Dedicated Hardware for Protection Against SPA/DPA Attacks
•
Advanced Protection Against Physical Attack, Including Active Shield
•
Environmental Protection Systems
•
Voltage Monitor
•
Frequency Monitor
•
Temperature Monitor
•
Light Protection
•
Secure Memory Management/Access Protection (Supervisor Mode)
Certification
•
EAL4+
•
VISA
•
CAST
Secure
Microcontroller
for Smart Cards
AT90SC
9618RT
Summary
Note: This is a summary document. A complete document will be
available under NDA. For more information, please contact your
local Atmel sales office.