Rainbow Electronics AT84AD001B - Manual

1
2153C–BDC–04/04
Features
• Dual ADC with 8-bit Resolution
• 1 Gsps Sampling Rate per Channel, 2 Gsps in Interlaced Mode
• Single or 1:2 Demultiplexed Output
• LVDS Output Format (100 Ω)
• 500 mVpp Analog Input (Differential Only)
• Differential or Single-ended 50 Ω PECL/LVDS Compatible Clock Inputs
• Power Supply: 3.3V (Analog), 3.3V (Digital), 2.25V (Output)
• LQFP144 Package
• Temperature Range:
– 0°C < TA < 70°C (Commercial Grade)
– -40°C < TA < 85°C (Industrial Grade)
• 3-wire Serial Interface
– 16-bit Data, 3-bit Address
– 1:2 or 1:1 Output Demultiplexer Ratio Selection
– Full or Partial Standby Mode
– Analog Gain (±1.5 dB) Digital Control
– Input Clock Selection
– Analog Input Switch Selection
– Binary or Gray Logical Outputs
– Synchronous Data Ready Reset
– Data Ready Delay Adjustable on Both Channels
– Interlacing Functions:
Offset and Gain (Channel to Channel) Calibration
Digital Fine SDA (Fine Sampling Delay Adjust) on One Channel
– Internal Static or Dynamic Built-In Test (BIT)
Performance
• Low Power Consumption: 0.7W Per Channel
• Power Consumption in Standby Mode: 120 mW
• 1.5 GHz Full Power Input Bandwidth (-3 dB)
• SNR = 42 dB Typ (6.8 ENOB), THD = -51 dBc, SFDR = -54 dBc at Fs = 1 Gsps
Fin = 500 MHz
• 2-tone IMD3: -54 dBc (499 MHz, 501 MHz) at 1 Gsps
• DNL = 0.25 LSB, INL = 0.5 LSB
• Channel to Channel Input Offset Error: 0.5 LSB Max (After Calibration)
• Gain Matching (Channel to Channel): 0.5 LSB Max (After Calibration)
• Low Bit Error Rate (10 -13 ) at 1 Gsps
Application
• Instrumentation
• Satellite Receivers
• Direct RF Down Conversion
• WLAN
Dual 8-bit
1 Gsps ADC
AT84AD001B
Smart ADC
™