Rainbow Electronics GT863-PY - Manual (Page 7)

GT863-PY Terminal Product Description
80269ST10026a Rev. 0 - 27/09/06
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved
page 7 of 50
The “Jammed” status is reported as unsolicited message through the AT-Command interface on
the RS232 connection.
The GT863-PY is compliant with the relevant parts of ETSI GSM Phase 2+ specifications (Normal
MS). Furthermore,
Telit GT863-PY is certified after the full conformity assessment against 1995/5
EC and R&TTE Directive and they don’t require any further certification test effort and expense.
The Terminal GT863-PY can be used in all EU countries and in other countries where a GSM-
850/E-GSM-900/DCS-1800MHz or PCS 1900 MHz network is available.
It is necessary to insert a SIM (Subscriber Identity Module, type 3 Volt Plug-in) on which the level
of worldwide access to the services of the related GSM/GPRS network depends.