Rainbow Electronics GT863-PY - Manual (Page 23)

GT863-PY Terminal Product Description
80269ST10026a Rev. 0 - 27/09/06
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved
page 23 of 50
• Data transmission according to the GSM 07.07, 07.05
• CSD up to 14.4 Kbps
• Fax service, Class 1 Group 3
2.14.6 Local security management
With lock of Subscriber Identity module (SIM), and security code request at power–up.
2.14.7 Call control
Call cost control function.
2.14.8 Phonebook
Function available to store the telephone numbers in SIM memory.
Capability depends on SIM version/memory
2.14.9 Characters management
Availability of lowercase, uppercase and IRA characters (International Reference Alphabet), in
TEXT and PDU mode.
2.14.10 SIM related functions
Activation/deactivation of the numbers stored in phone book FDN, ADN and PINs. Extension at the
PIN2 for the PUK2 insertion capability for lock condition.
Do not insert or remove the SIM when the product is in power saving mode.
NOTE: The SIM (Subscriber Identity Module) from the Network Operator or Service Provider can
be configured in different ways, e.g. related to
• The presence of SIM Applications (not supported by the current Software of GT863-PY
Terminal),
• The possibility to de-activate the necessity to enter the PIN (Personal Identification
Number) as condition for registering in the network;
• The possibility that the Terminal can be locked by factory SW settings to a certain SIM of a
certain Network Operator.
• The presence and format of certain phone book directories (PB, FDN, ADN) or SMS
memories.
• The presence, content and format of other registers in the SIM, e.g. network operator’s
name, list of preferred networks (names change from time to time), etc.
• The possibility to roam between several mobile networks even in the home country.
2.14.11 Call status indication
The call status indication by AT commands and Status LED is supported.