Rainbow Electronics MAX4029 - Manual (Page 11)

The bypass capacitors should include a 0.1µF, ceramic
surface-mount capacitor between V
CC and the ground
plane, located as close to the package as possible.
Optionally, place a 10µF capacitor at the power supply’s
point-of-entry to the PC board to ensure the integrity of
incoming supplies. The power-supply traces should lead
directly from the capacitor to the V CC pin. To minimize
parasitic inductance, keep PC traces short and use sur-
face-mount components.
If input termination resistors and output back-termination
resistors are used, they should be surface-mount types,
and should be placed as close to the IC pins as possible.
MAX4028/MAX4029
Triple/Quad, 2:1 Video
Multiplexer-Amplifiers with Input Clamps
______________________________________________________________________________________ 11
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
IN3A DISABLE
OUT1
V CC
OUT2
CLAMP/KEY_2
OUT3
GND
CLAMP/KEY_3
TOP VIEW
MAX4028
TSSOP/SO
IN2A
IN1A
IN1B
A/B
KEYREF
IN2B
IN3B
20
19
18
17
16
15
14
13
1
2
3
4
5
6
7
8
CLAMP/KEY_4
DISABLE
OUT1
V
CC
IN1A
IN2A
IN3A
IN4A
OUT2
CLAMP/KEY_2
OUT3
GND IN2B
IN1B
KEYREF
A/B
12
11
9
10
CLAMP/KEY_3
OUT4 IN4B
IN3B
MAX4029
TSSOP/SO
Pin Configurations
Chip Information
TRANSISTOR COUNT: 1032
PROCESS: Bipolar