RocketFish RF-TVMLPT01 - User Manual - Manual (Page 9)

9 Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)
RF-TVMLPT01V2 TV Wall Mount
STEP 5 - Option 1: Attaching the mounting hardware to TVs with a flat back
1 Place the washers (D) over the holes in the TV bracket (A) that align with the screw holes on the back of your
TV, then insert the screws (B) through the washers and the TV bracket.
NOTE: If the hole pattern on your TV is 75 mm x 75 mm, the washers (D) will not fit, so do not use them.
2 Tighten all screws carefully until snug. Do not overtighten.
You’ll need
Note: No washers used with 75 mm x 75 mm
hole pattern.
D (4)
B (4) Phillips screwdriver
Screws Washers
TV bracket (A)
RF-TVMLPT01V2_13-0602_MAN_V4_ENG-GIFs.fm Page 9 Tuesday, July 9, 2013 1:33 PM