OMAX MicroMAX JetMachining Center - Manual

OMAX MicroMAX JetMachining Center
The MicroMAX ™ JetMachining ® Center is the ideal solution for ultra-precision abrasive waterjet machining. Utilizing advanced high
precision linear encoders, innovative vibration isolation, and proven software control systems, the MicroMAX JetMachining Center
is capable of a positioning accuracy of less than five microns while retaining all the advantages of abrasive waterjet machining.
The MicroMAX JetMachining Center cuts without changing the material, so no secondary processing is required. The MicroMAX
JetMachining Center can machine stainless steel, titanium, carbon fiber, PEEK, glass, nitinol, graphite, copper, composites,
laminates, and more, with high precision and smooth finishing, for either prototyping or production.
FEATURES BENEFITS
• Very high precision with 0.1 micron linear optical encoder system
• Highly rigid structure with low mass bridges and carriages
• Vibration isolation of table and gantries
• Motorized Z Axis for precision nozzle height positioning
• All components have matched thermal expansion
• Equipped with 7/15 Mini MAXJET ® 5i Nozzle
• Revolutionary patent-pending process for fine abrasive feed rate
• Full enclosure with environmental controls
• Advanced pressure controls for piercing delicate materials
• Machines a wide range of materials with high accuracy
• No heat-affected zones or mechanical stresses
• Multiple fixturing options including EDM-style fixturing
• Leaves behind a satin-smooth edge, reducing secondary operations
• Stiff construction greatly reduces vibration and increases accuracy
• Easily cut non-conductive and reflective materials
• Can machine hardened steel as easily as annealed steel
PRECISION ABRASIVE WATERJET SYSTEMS
MICROMAX
Made in the USA WWW.OMAX.COM