OMAX Precision Optical Locator - Manual

PRECISION ABRASIVE WATERJET ACCESSORIES
Accessory Specifications
POL
POL
Standard Features
• USB camera with microscope lens to
zoom in on material features, locate,
and select points with software’s
precision crosshair alignment tool
• Video image of featured location can
be saved for quality control records
• Light ring illuminates viewing area
• When used with OMAX Watcher utility,
the accessory allows remote machine
monitoring and shut down
• Includes two USB extension cables;
two camera tripods; and accessory
carrying case
• Camera resolution: 1280 x 1024
pixels*
Requirements
• Video/optical locating system
eliminates the need for cumbersome
point location using time consuming
dial indicators
• Video monitoring and software
functions measure the location of
material features to prepare for
secondary machining, such as drilling
in the center of a disk
• Pick up locating points without the
operator leaving the control console
OMAX Corporation
21409 72nd Ave South, Kent, WA 98032
253-872-2300
tel 253-872-6190 fax
1-800-838-0343 toll-free
WWW.OMAX.COM website
Printed in the U.S.A © April 2012 All rights reserved. S-0016
C o r p o r a t i o n
The OMAX Technology
Guarantee entitles you, as
the original owner, to free
OMAX software upgrades
for the life of the machine.
Connect and follow OMAX for the latest news
in waterjet technology.
* Subject to change without notice
OMAX
®
Precision Optical Locator
The Precision Optical Locator (POL), an
accessory combining hardware and software
technology, allows you to determine the location
of parts on the machining table or features on
existing parts or materials.
The POL includes a compact video camera
mounted to the Z-axis to precisely locate points,
edges, or holes on a piece of material placed
on the OMAX cutting table. The accessory’s
software is integrated with Intelli-MAX
® Make,
providing you the interface to view the live video
feed from the camera and apply application
tools to measure and locate features.
BEST APPLICATIONS:
• Locate tool path with existing features when material is larger
than the cutting area of the machine
• Reverse engineer or measure existing parts
OMAX POL installed next to a Tilt-A-Jet ®