OMAX Drill Head - Manual

C o r p o r a t i o n
PRECISION ABRASIVE WATERJET ACCESSORIES
Accessory Specifications
DRILL HEAD
OMAX
®
Drill Head
Drill Head
The OMAX Technology
Guarantee entitles you, as
the original owner, to free
OMAX software upgrades
for the life of the machine.
Achieve reliable piercing of composites and
laminates with an OMAX-engineered pneumatic drill
specifically designed for the waterjet environment.
Standard Features
• Chrome-plated and hard alloy steel
components enclosed inside water-
resistant cases and bellows to protect from
a waterjet environment
• Corrosion-resistant cylinder wall will not
rust in moist air
• Highly efficient 5,000 RPM air motor
provides maximum power with minimum
air consumption. Air motor design
promotes longer drill bit life and quality
drilled holes.
• Drill equipped with a collet holder and
collet to hold a 1/16" drill bit
• Fully adjustable pneumatic feed rate and
depth of feed up to 3" of travel and 112
lbs of thrust with 85 psi air
• Automatically controlled by OMAX
Windows ® PC-based control system
Benefits
• Successfully pre-drill brittle and sensitive
materials
• Reliably produce parts without
delamination
• Eliminate the process of tedious hand
drilling with customized registration
templates. When used with the OMAX
PC-based controller, the Drill Head can
quickly and automatically drill holes in
desired locations before cutting material
with a jet stream.
Requirements
• Windows PC-based controller installed
with Intelli-MAX ® Software Suite Version
18.0 or higher
• Motorized Z-Axis, Tilt-A-Jet, or A-Jet ®
• Routinely apply air line lubrication and
gear train grease
• Filtration system (40 microns max.) for the
air feed connected to the drill
NOTE: Check with OMAX Sales for more details.
NOTE: Optional accessories installed on an OMAX may
reduce cutting travel. Contact OMAX for consultation.
OMAX Corporation
21409 72nd Ave South, Kent, WA 98032
253-872-2300
tel 253-872-6190 fax
1-800-838-0353 toll-free
WWW.OMAX.COM website
About OMAX
OMAX is the leader in designing and
manufacturing precision abrasive waterjet
machining equipment. For more informa-
tion on what other OMAX products and
accessories can do for you, call us today.
Solely customized for OMAX machining, the robust
Drill Head permits repeatable piercing of laminates
and composites prior to abrasive waterjet cutting and
accurately pierces small diameter holes in thick material.
With Intelli-MAX
® innovation, no separate programming
is required.
The OMAX Drill Head is mounted to the Y-axis carriage
and is easily adjustable in the Z-direction to move the
accessory out of the way when not in use. No external
power is required.
Printed in the U.S.A © January 2012 All rights reserved. S-0019
OMAX Drill Head installed next to a Tilt-A-Jet ®
Connect and follow OMAX for the latest news
in waterjet technology.