OMAX Laminar Filter - Manual (Page 2)

LAMINAR FILTER
When cleaning the tank, the removable angled plate module
can be lifted from the accessory unit. An operator can clean out
the sediment from under the stationary angled plates by using the
Special Sediment Rake.
SYSTEM SPECIFICATIONS
• Submersible pump: 120 V, 60 Hz, 1 PH, ¼ hp or less, thermally protected,
cord-connected, with GFCI, UL or CSA
• 10 ft hose and fittings for sending clean water to a Closed Loop System or
down the drain
• 15 ft sediment pump hose with Splash Diverter
OPTIONS
• Submersible pump: 220 V, 50 Hz, 1 PH, ¼ hp or less, thermally protected,
cord-connected, with PRCD, CE-marked
HIGHLIGHTS
• Convenient hose for directing clean water to a Closed Loop System or drain
• Rust-proof construction
• Complete cleaning system includes Sediment Pump, Splash Diverter, and
Special Sediment Rake
• Hose and Splash Diverter are conveniently stored inside the Laminar Filter tank
Water Filtration Process: Red/blue arrows indicate a slow moving,
laminar water flow ideal for the maximum settling of small and lightweight
particles
Exit to drain
or Closed
Loop System
Removable module of
angled plates
Pump outlet hose
to move sediment
laden water to the
Dump Hopper or
Catcher Tank
(Stowed during
normal operation)
Water entry
from Catcher
Tank
Submersible
Sediment
Pump
Angled filter
plates
Splash
Diverter
Special
Sediment Rake Stationary
module of
angled plates
OMAX CORPORATION
21409 72nd Avenue South
Kent, WA 98032
TEL 1-253-872-2300 / 1-800-838-0343
FAX 1-253-872-6190
WWW.OMAX.COM
Made in the USA
Specifications subject to change without notice.
600065B January 2014