Omax pressure reverse osmosis system, About omax, Power requirements – OMAX Reverse Osmosis System User Manual
Page 2: Quality monitor, Pre-treatment, Membranes, Membrane vessels, Frame, Water softener, Benefits
About OMAX
OMAX has the industry leading patented
abrasivejet controller with a built-in
expert system. The OMAX Software
makes it easy to machine precision parts
as fast as possible at the lowest cost.
JetMachining is ideal for short-run part
production, just-in-time manufacturing,
tooling, and prototype part development.
It requires no tool changes or complex
fixturing, so you can reduce setup times
by at least 50%.
For more information on what other
OMAX products and accessories can do
for you, call us today at 800-838-0343
or visit our website at www.omax.com.
Note: Specifications subject to change without notice.
OMAX Pressure Reverse Osmosis System
Power Requirements
110V, 60 Cycle, 10AMP
Quality Monitor
Digital Total Dissolved Solids Meter
Pre-Treatment
5 Micron Filter
20”
Carbon Block Filter
20”
Membranes
Membranes (2)
4” x 40”
Max. Operating Pressure
125 psi
Feed Temperature
95° F
Recommended pH
6 to 12
Free Chlorine Tolerance
<0.1 ppm
Average Rejection
96%
Gallons per Day
2500 at 77 psi
Membrane Vessels
Number of Vessels
2
Vessel Rating
240 psi
Vessel Construction
PVC
Max. Temperature
130° F
Frame
Construction
Powder-coated steel
Dimensions
18”H x 38”W x 6”D
Mounting
Wall
Water Softener
Type
Time clock initiated
Grains Removed
45,000
Flow Rate
10 gpm
Resin
1.5 cubic feet total
Pipe Size
3/4”
Resin Tank Dimensions
10” x 54”
Brine Tank Dimensions
18” x 30”
Brine/Salt
Tank
Softener
Customer Supplied Drain
Pump
Station
City Water
Feed
60 psi
Reverse Osmosis Unit
(Wall Mounted)
High Level
Switch
Reject
Product
Gray Level Control Wire
Benefits
•
A reverse osmosis system removes
90% to 95% of the total dissolved
solids in your water. Dissolved parti-
cles are the primary source of damage
to OMAX waterjet equipment.
•
A reverse osmosis system protects your
waterjet equipment so you don’t have
to replace your expendables nearly
as often.
•
Virtually hands-free operation.
•
Pure water can be used for other
equipment in shop (EDM, etc.).
•
More hours of running time between
maintenance.
•
Inexpensive filter changes on reverse
osmosis once per month.
•
Most cities only charge $2.50 per
1000 gallons making the cost for
water minimal.
C o r p o r a t i o n
OMAX Corporation
21409 72nd Ave South, Kent, WA 98032
253-872-2300
tel
253-872-6190
fax
1-800-838-0343
toll-free
WWW.OMAX.COM
website
Printed in the U.S.A © June 2007 All rights reserved. OC-009