Cobalt Digital FUSION 3G 9931-EMDE 3G_HD_SD-SDI Embedder_De-Embedder - Manual (Page 93)

9931-EMDE-OM (V1.15) 9931-EMDE PRODUCT MANUAL 3-41
Operating Instructions
9931-EMDE Function Submenu List and Descriptions
Output Audio Routing/Controls
Provides controls to route card audio from card
processing paths to outgoing embedded and AES audio
destinations. Use the corresponding sub-tab to access
embedded or AES output routing.
Table 3-2 9931-EMDE Function Submenu List — continued
The card internal bus, Audio DSP outputs, and
the Dolby encoder output pair are available as
sources for the card embedded audio and AES
audio outputs.
The example here shows various Source
routing selections (using the Emb Audio Out
and AES Audio Out sub-tabs) that direct upmix
outputs L thru Rs to Embedded outputs Ch 1
thru Ch 6, the pre-upmix Bus Ch1 and Ch 2
sources to Embedded outputs Ch 7 and Ch 8,
and a Dolby encoded pair to AES outputs Ch 1
and Ch 2 (unused embedded and AES
channels can be set to Silence or Mute).
Each bus channel provides Gain, Mute, and a
peak level display.
The source-to-destination correlation shown
here is only an example; any of the digital audio
output destinations described on the following
pages can receive inputs from any of the
internal bus, DSP, or Dolby encoder sources.
Embed Out
Ch 7, Ch 8
AES Out
Ch 1, Ch 2
Output Audio
Crosspoint
Card 16-Ch Internal Bus
Audio
DSP
Dolby ®
AC-3
Encode
Bus Ch 1, 2
Upmix L thru Rs Embed Out
Ch 1 - Ch 6
Dolby ENC