Cobalt Digital FUSION 3G 9931-EMDE 3G_HD_SD-SDI Embedder_De-Embedder - Manual (Page 58)

3
Accessing the 9931-EMDE Card via Remote Control
3-6 9931-EMDE PRODUCT MANUAL 9931-EMDE-OM (V1.15)
Accessing the 9931-EMDE Card via Remote Control
Access the 9931-EMDE card using DashBoard™ or Cobalt ® Remote Control
Panel as described below.
Accessing the 9931-EMDE Card Using DashBoard™
1. On the computer connected to the frame LAN, open DashBoard™.
2. As shown below (in the left side Basic View Tree) locate the Network
Controller Card associated with the frame containing the 9931-EMDE
card to be accessed (in this example, “MFC-8320-N SN: 00108053”).
3. As shown below, expand the tree to access the cards within the frame.
Click on the card to be accessed (in this example, “slot 6: 9931-EMDE”).
.
As shown on the next page, when the card is accessed in DashBoard™
its function submenu screen showing tabs for each function is displayed.
(The particular submenu screen displayed is the previously displayed
screen from the last time the card was accessed by DashBoard™).
DB_ACCESS1.PNG
DB_ACCESS2A.PNG