Cobalt Digital FUSION 3G 9931-EMDE 3G_HD_SD-SDI Embedder_De-Embedder - Manual (Page 78)

3
9931-EMDE Function Submenu List and Descriptions
3-26 9931-EMDE PRODUCT MANUAL 9931-EMDE-OM (V1.15)
(continued)
• Input Triggering Controls Individual ARC format input controls allow accepting or rejecting received
ARC formats as follows:
• Trigger on AFD:
• Off rejects AFD-coded triggering.
• On allows trigger on AFD.
• Trigger on WSS:
• Off rejects WSS-coded triggering.
• AFD allows triggering on AFD-coded WSS.
• ETSI allows triggering on ETSI-coded WSS.
• Trigger on VI:
• Off rejects VI-coded triggering.
• AFD allows triggering on AFD-coded WSS.
• SMPTE allows triggering on SMPTE-coded WSS.
Note: If multiple formats are present on the input video, AFD preempts
other formats, followed by WSS or VI (as set by the
WSS/VI Priority control).
• Output Enable Controls Individual ARC format input controls allow accepting or rejecting received
ARC formats as follows:
• AFD Output:
• Disable turns off AFD format on output.
• Enable inserts AFD packet on output, and allows changing line
number.
• Follow Input Line inserts AFD packet on same line as received AFD
line number (where applicable).
• WSS Output:
• Disable turns off WSS format on output.
• AFD Enabled inserts AFD-coded WSS on output.
• ETSI Enabled inserts ETSI-coded WSS on output.
• VI Output:
• Disable turns off WSS format on output.
• AFD Enabled inserts AFD-coded VI on output.
• SMPTE Enabled inserts SMPTE-coded VI on output.
• Output Status Displays Displays the current output status, coding, and H/V ratio for AFD, WSS,
and VI formats.
• If a format is active and enabled (as set with the Output Enable
controls), the code and H/V description is displayed.
• If a format is not outputting data, Disabled is displayed.
Note: • The code displayed shows the outputted code. If the code is
modified by user settings performed in the AFD Map sub-tab,
these changes are shown here. Refer to AFD Map sub-tab for
more information.
• As shown in the example, settings that result in invalid mapping
across format translations will display Disabled. In these cases,
no output is inserted for the format.
• AFD Output Line Control Allows selecting the line location of the AFD data within the video signal
Ancillary Data space.
Note: • The card does not check for conflicts on a given line number.
Make certain the selected line is available and carrying no other
data.
• For progressive formats, the Field 1 control serves as the line
number control.
Table 3-2 9931-EMDE Function Submenu List — continued