Cobalt Digital FUSION 3G 9931-EMDE 3G_HD_SD-SDI Embedder_De-Embedder - Manual (Page 53)

9931-EMDE-OM (V1.15) 9931-EMDE PRODUCT MANUAL 3-1
Chapter 3
Chapter 3
Operating Instructions
Overview
This chapter contains the following information:
• Control and Display Descriptions (p. 3-1)
• Accessing the 9931-EMDE Card via Remote Control (p. 3-6)
• Checking Card Information (p. 3-8)
• Ancillary Data Line Number Locations and Ranges (p. 3-9)
• 9931-EMDE Function Submenu List and Descriptions (p. 3-10)
• Troubleshooting (p. 3-62)
Control and Display Descriptions
Note: When you are familiar with the card functions and controls described in this
chapter, please go to the Support>Documents>Reference Guides link at
www.cobaltdigital.com for Fusion3G
® application notes covering comprehen-
sive setup of practical processing applications.
This section describes the user interface controls, indicators, and displays
(both on-card and remote controls) for using the 9931-EMDE card. The
9931-EMDE functions can be accessed and controlled using any of the user
interfaces described here.
The format in which the 9931-EMDE functional controls, indicators, and
displays appear and are used varies depending on the user interface being
used. Regardless of the user interface being used, access to the 9931-EMDE
functions (and the controls, indicators, and displays related to a particular
function) follows a general arrangement of Function Submenus under which
related controls can be accessed (as described in Function Submenu/
Parameter Submenu Overview below).
If you are already familiar with
using DashBoard or a Cobalt
Remote Control Panel to control
Cobalt cards, please skip to
9931-EMDE Function Submenu
List and Descriptions (p. 3-10).