Cobalt Digital FUSION 3G 9931-EMDE 3G_HD_SD-SDI Embedder_De-Embedder - Manual (Page 60)

3
Checking Card Information
3-8 9931-EMDE PRODUCT MANUAL 9931-EMDE-OM (V1.15)
Checking Card Information
The operating status and software version the 9931-EMDE card can be
checked using DashBoard™. Figure 3-5 shows and describes the
9931-EMDE card information screen using DashBoard™.
Note: Proper operating status in DashBoard™ is denoted by green icons for the sta-
tus indicators shown in Figure 3-5. Yellow or red icons respectively indicate
an alert or failure condition. Refer to Troubleshooting (p. 3-62) for corrective
action.
Figure 3-5 9931-EMDE Card Info Utility
The Tree View shows the cards seen by DashBoard™.
In this example, Network Controller Card MFC-8320-N
(serial number ...8053) is hosting a 9931 card in slot 6.
Status Displays
Clicking the Status sub-tab shows the status the signal being
received by the 9931, and other card conditions. Green
Settings icon shows that any changes made on DashBoard™
are sucessfully saved on the card’s memory.
Clicking the Product sub-tab shows product information such
as card model, options installed, and firmware versions. Use
this information when communicating to Cobalt
®
regarding the
card.
9931_CARD_INFO.PNG