Cobalt Digital COMPASS 9275 HD_SD-SDI Analog Audio De-Embedder - Manual (Page 36)

4-12 •••• Control and Monitoring 9275-4C / 9275-8C User Manual •••• (V 1.2)
Menu
Select
Card-Edge Menu
Label
Menu Name
Card-Edge Item
Label
Item Name
Frq Swp Frequency Sweep
100% 100% Full Field Bars
Grp 1 Group 1
Grp 2 Group 2
Grp 3 Group 3
5
Grp Sel Group Select
Grp 4 Group 4
Enabled*
6
Grp Enbl Group Enable
Disabled
Mute
T4k 4kHz Tone
T2k 2kHz Tone
T1k 1kHz Tone
T.5k 500Hz Tone
7
Ch1 Src Channel 1 Source
G1C1 - G4C4
Group 1, Channel 1 to Group 4,
Channel 4
8
Ch2 Src Channel 2 Source Same as above
9
Ch3 Src Channel 3 Source Same as above
A
Ch4 Src Channel 4 Source Same as above
Alg Sel (9275-4C) Analog Channel Select 1-4 Alg1 - Alg4 Analog 1 to Analog 4
B
Alg Sel (9275-8C) Analog Channel Select 1-8 Alg1 - Alg8 Analog 1 to Analog 8
Source (9275-4C) Analog Source G1C1 - G4C4
Group 1, Channel 1 to Group 4,
Channel 4
C
Source (9275-8C) Analog Source G1C1 - G4C4
Group 1, Channel 1 to Group 4,
Channel 4
D
ChB Src (9275-A) Channel B Source G1C1 - G4C4
Group 1, Channel 1 to Group 4,
Channel 4
Menu Descriptions
This section briefly summarizes the menu parameters available in the card-edge display.
0 — Home
This read-only menu displays the product name and the slot the card is installed in the frame.
1 — Factory Defaults
This function enables you to return all controls to their factory default values. Use the following
procedure to reset the card parameters to factory default values using the card-edge controls: