Cobalt Digital COMPASS 9275 HD_SD-SDI Analog Audio De-Embedder - Manual (Page 21)

9275-4C / 9275-8C User Manual •••• (V 1.2) User Controls •••• 3-3
Control and Monitoring Features
This section provides information on the card-edge LEDs for the 9275.
Figure 3.2 9275 Card-edge Controls
Status and Selection LEDs on the 9275
The front-edge of the 9275 has LED indicators for the power, video input status and
communication activity. Basic LED displays and descriptions are provided in Table 3.1.
Table 3.1 LEDs on the 9275
LED Color Display and Description
Green
When lit green, this LED indicates that the card is functioning
normal and that no anomalies have been detected. The following
conditions must be satisfied:
• a valid input signal is present
• a valid reference signal is present when a reference is required,
and that the reference standard matches the input standard.
Flashing Green
When flashing green, this LED indicates the bootloader is waiting
for a software upload.
Flashing Green
and Orange When lit green with flashing orange, this LED indicates there is a
signal error such as a missing or invalid input or reference.
Orange When lit orange, this LED indicates the card is powering on.
Red When lit red, this LED indicates the card is not operational.
OK/ERROR
Off When off, this LED indicates there is no power to the card.