Cobalt Digital COMPASS 9275 HD_SD-SDI Analog Audio De-Embedder - Manual (Page 30)

4-6 •••• Control and Monitoring 9275-4C / 9275-8C User Manual •••• (V 1.2)
Menu Item Parameters Description
Custom*
Sets the output to a custom color in
the event of a loss of video input.
Use the Y, Cr, and Cb sliders to
configure the color.
Y slider
Sets the luminance component of the
Loss of Input Custom video signal.
Cr slider
Sets the Cr component of the Loss
of Input Custom video signal.
Loss of Input
Cb slider
Sets the Cb component of the Loss
of Input Custom video signal.
None
Specifies the type of test pattern to
output
100% Color Bars
Frequency Sweep
Black
Blue
Matrix Pathological
Luma Ramp
Y/C Ramp
Test Pattern
75% SMPTE Bars
Specifies the type of test pattern to
output
20 Bit* Embeds 20bit audio
24 Bit Embeds 24bit audio
SD Audio
Auto
Embeds 20-24bit audio depending
on the source and number of bits
Silence Threshold
(dB)
-96 to 0
Audio below the specified threshold
value is considered silent
Silence Timeout
(sec)
1 to 60
Audio silent for longer than the
specified value raises an alarm
Off*
Analog de-emphasis is always
disabled
On
Analog de-emphasis is always
enabled
Setup
Analog Output
Input # - De-
Emphasis
Auto
Analog de-emphasis is enabled
depending on the channel status
emphasis bits