Daystar KF09111BK - Manual (Page 2)

3
Part List
Tools Needed
Quantity Part Number Description
2 M03876 Front Leveling
Spacer
6 S11094 Stud extenders
6 S10010 10mm Washers
6 S10292 10mm 1.5 lock nuts
1 P11153 Warning decals &
thread lock
Quanti-
ty
Description
1 Floor jack
2 Jack stands
2 Wheel chocks
1 Pry bar
1 Lug wrench
1 1/4” Ratchet
1 1/2” Ratchet
1 10mm wrench
1 20mm wrench
1 21mm wrench
1 Metric sockets
1 Torque wrench
4
!Warning: Always work with appropriate personal safety
gear including safety glasses, gloves and hearing protection if
using air powered tools.
Begin by inspecting the components & hardware for damage.
Then compare components & hardware to the bill of materials for
completeness. If anything is missing/damaged, do not proceed
with the installation. Please, call Daystar Products (800-595-
7659) and we will send you the missing of damaged components
free of charge.
!Caution: Vehicle front end must be raised to install leveling
kit. Using a hydraulic chassis lift will greatly ease installation.
If another jack is used, assure vehicle is level on a firm sur-
face, in park (1st gear), rear wheels blocked and jack stands
in place to support vehicle in case jack or vehicle shifts.