Daystar KF09115BK User Manual
Page 4
5.
Separate the upper ball joint from the spindle. Use a ball
joint separator or other suitable tool.
6.
Remove the 3 upper strut mounting nuts on the top off the
strut tower.
7.
Loosen the lower strut bolt and nut and push the upper
control arm up and pull the strut toward you.
8.
Apply the thread lock to the (3) strut studs and install the
stud extenders and tighten down.
9.
Install the spacer lift on top of the strut plate.
10.
Push the upper control arm up and push the strut inward and
place the jack under the lower control arm and jack up so the
strut studs will go threw the strut tower, use the new lock nuts
and washers to install the strut.
11. With a pry bar pull down on the upper control arm to install
the ball joint into the spindle and install the nut.
- KJ09112BK (1 page)
- KJ09113BK-1 (1 page)
- KJ61004BK (1 page)
- KF09112BK (2 pages)
- KA09100BK (6 pages)
- KC09102BK (1 page)
- KJ60003 (1 page)
- KJ04503BK (1 page)
- KJ71043BK (4 pages)
- KT09118BK (1 page)
- KC09122-2 (2 pages)
- KF09102 (1 page)
- KJ60005 (1 page)
- KJ61003 (1 page)
- KT09120BK (4 pages)
- KT09110BK (2 pages)
- KN09107 (2 pages)
- KJ09152BK (1 page)
- KJ02001 (1 page)
- KJ09156BK-2 (4 pages)
- KJ61009BK (1 page)
- KCO9106 (8 pages)
- KG09108 (4 pages)
- KF09108 (4 pages)
- KJ71034TN (8 pages)
- KJ09117BK-2 (1 page)
- KJ61002 (1 page)
- KU70038BK-1 (4 pages)
- KJ61017 (1 page)
- KT09103BK (1 page)
- KJ61005BK (1 page)
- KC09107 (1 page)
- KJ09155BK-2 (4 pages)
- KU70035BK-2 (4 pages)
- KC09121 (2 pages)
- KT09105BK (1 page)
- KJ09153CAMO (6 pages)
- KG09109 (4 pages)
- KU70037BK-1 (4 pages)
- KJ61019BK (1 page)
- KJ09103CAMO (2 pages)
- KJ09123BK-1 (2 pages)
- KF09050 (2 pages)
- KT09116BK (3 pages)
- KT09115-1 (3 pages)