Daystar KF09124BK User Manual

Page 5

16. Tighten the lower strut bolt and nut to factory specs.

17. Repeat steps 2 threw 15 on other side of the vehicle.
18. After lift has been installed on both side check to see that

all the bolts and nuts are torque to Factory specifications.

Tighten nut

Tighten 3 nuts

19.

Reinstall driver and passenger tires and wheels.

20.

Remove jack stands and lower the truck back on the ground,

remove all jacks and jack stands from under vehicle.

21.

Torque the lug nuts to 85 ft.lbs. using an X pattern.

Daystar® Lifetime GoEverywhere Limited Warranty

Your Daystar® Comfort Ride or Budget Boost leveling kit is covered by the
following Go Everywhere Lifetime Limited Warranty provided exclusively
by Daystar Products International, Inc., 841 South 71st Ave., Phoenix, AZ
85043 (“Daystar”).

!Caution: Have an alignment professional check and ad-
just the alignment to factory specifications.

22.With the vehicle on the ground cycle the steering wheel
side to side and inspect suspension components, brake

lines and tires to ensure there are not any clearance issues.
Jounce the suspension to assure front suspension operates
freely, brake lines retain proper slack at full extension and
that they remain clear of springs or other obstructions.

23.

Install “Warning to Driver” decal on the vehicle’s sun

visor or dash. The decal must be placed in a conspicuous
location. Anyone that operates the vehicle must be made
aware of the changes made.

24.

After 25 miles of driving re-torque the lug nuts to

85ft.lbs..

25.

After 500 miles of driving re-torque all of the hardware

associated with the lift kit spacer installation to factory
specifications Repeat torqueing procedure as required.