beautypg.com

Chain loop torque arm repair kit (continued) – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1128 User Manual

Page 24

background image

6. Installation

24

PNEG-1128 Chain Loop System without Controls

Chain Loop Torque Arm Repair Kit (Continued)

Place the C-clamp bracket to the back side of the square tubing.

(See Figure 6E.)

Figure 6E

Place the torque plate anchor bracket between the torque plate assemblies and attach it to the C-clamp
using the 3/8"-16 hardware.

(See Figure 6F.)

NOTE: Leave the hardware loose to allow for ease of assembly.

Figure 6F

See also other documents in the category Grain Systems Equipment: