Grain Systems PNEG-1707 - Manual (Page 42)

8. Dryer Operation
42 PNEG-1707 TM-Series Tower Dryer
9. To avoid overloading dry conveyors taking grain away from the dryer when the dryer unload is
operating in the automatic mode, it may be necessary to limit the maximum and minimum unload
rate on the dryer’s metering system. To accomplish this, press the Unload Parameters button on
the Setup screen.
(See Figure 8C on Page 39.) The following screen will appear. (See Figure 8H.)
Set the appropriate limits if necessary.
Figure 8H