Grain Systems PNEG-1820 - Manual (Page 14)

14 PNEG-1820 CE Compliant Top Dry Series 2000 Autoflow
6. Control Panel
Dryer Control Panel
Figure 6A
Moisture Control Switch
Determines if the grain temperature set point is used in the operation of the dryer.
When “ON” position, the grain will be dumped when it reaches the temperature set point and the dry timer
has reached zero.
When “ON” the switch is lit when the grain is below set point.
Control Power Switch
Turns ON/OFF power to the electronic monitoring control system.
Aeration Fan Switch
Controls the operation of the aeration fan located at the bottom of the bin.
AUTO = Fan runs only with the main drying fans.
ON = Fan comes on when the dryer is running.