Grain Systems PNEG-584 - Manual (Page 4)

4
SERIES TWO HEATER
WARNING! BE ALERT!
Personnel operating or working around
electric fans should read this manual.
This manual must be delivered with the
equipment to its owner. Failure to read
this manual and its safety instructions is
a misuse of the equipment.
The symbol shown is used to call
your attention to instructions con-
cerning your personal safety. Watch
for this symbol; it points out impor-
tant safety precautions. It means
"ATTENTION", "WARNING",
"CAUTION", and "DANGER".
Read the message and be cautious
to the possibility of personal injury
or death.
SAFETY ALERT SYMBOL
ROOF WARNING AND DISCLAIMER
Roof Damage Warning And Disclaimer
GSI DOES NOT WARRANT ANY ROOF DAMAGE CAUSED
BY EXCESSIVE VACUUM OR INTERNAL PRESSURE FROM
FANS OR OTHER AIR MOVING SYSTEMS. ADEQUATE VEN-
TILATION AND/OR "MAKEUP AIR" DEVICES SHOULD BE
PROVIDED FOR ALL POWERED AIR HANDLING SYSTEMS.
GSI DOES NOT RECOMMEND THE USE OF DOWNWARD
FLOW SYSTEMS (SUCTION). SEVERE ROOF DAMAGE CAN
RESULT FROM ANY BLOCKAGE OF AIR PASSAGES. RUN-
NING FANS DURING HIGH HUMIDITY/COLD WEATHER
CONDITIONS CAN CAUSE AIR EXHAUST OR INTAKE PORTS
Thank you for choosing a Neco product. It is designed
to give excellent performance and service for many
years.
This manual describes the operation of the Neco Series
Two Heater. It is designed for low to medium tempera-
ture grain conditioning, and is ideal for the aeration of
rice, popcorn or other select grains. It is available in both
propane vapor and natural gas models.
The principal concern of Neco is your safety and
the safety of others associated with grain handling
equipment. This manual is written to help you under-
As owner and/or operator, it is your responsibility to
know what requirements, hazards and precautions exist,
and to inform all personnel associated with the equip-
ment, or who are in the dryer area. Avoid any alterations
to the equipment. Such alterations may produce a very
dangerous situation, where serious injury or death may
occur.
HEATER OPERATION
stand safe operating procedures, and some of the prob-
lems that may be encountered by the operator or other
personnel.