Grain Systems PNEG-1283 - Manual (Page 13)

4. Installation
PNEG-1283 Moisture Sampler 13
Installation Instructions for Dryers with New Discharge Box Assembly
Figure 4K
1. Remove the Moisture Sampler tube cover plate (D01-1886). (See Figure 4K.)
2. Remove the Moisture Sampler cover plate (D01-1885). (See Figure 4K.)
3. Install the Moisture Sampler using three (3) 5/16" bolts (S-8135) and nuts (S-3611) on the drive end
and four (4) 5/16" bolts (S-8135) nuts (S-3611) on the sensor end making sure the heads of the
bolts are on the inside of the auger tube.
Moisture sampler
cover plate (D01-1885)
Standard grain sampler
Moisture sampler tube
cover plate (D01-1886)