Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- Banks iQ 2.0 Ford(03-10), Chevy(01-10), Dodge(03-07) User Manual
Page 40
40
96834 v.1.0
To update Tuner/SpeedBrake
1.
Go to www.bankspower.com/Banks
iQ and check for the Banks Power
Tuner or SpeedBrake updates. To
receive update notices, we invite you
to register at www.bankspower.com/
banksiq to receive important e-mails
regarding updates and upgrades for
your Banks iQ device.
2.
Download them onto your Micro-SD
card (sold separately) and insert it into
the port on your Banks iQ.
3.
Press the ‘Update Tuner’ or the
‘Update SpeedBrake’ button on the
‘Adjustments’ menu.
4.
Press the ’check For Updates’
button and available Tuner/SpeedBrake
updates will appear in the window. See
Figure 42. Highlight the appropriate
file name from the available list.
5.
Press ‘Update Tuner’ or ‘Update
SpeedBrake’ to download updates into
Banks iQ.
NOTE: A warning message will appear
if the chosen file is the same or older
then the file currently in use.
For more detail instruction to
update Banks tuner/speedBrake
please go to www.bankspower.
com/downloads .
To update Banks iQ Software
1.
For Windows XP users, make sure
that Microsoft ActiveSync is installed
on your computer and that you have
an active internet connection.
For Windows 7 and Vista users, make
sure that Microsoft Mobile Device is
installed on your computer.
NOTE: If you do not have Microsoft
ActiveSync or Mobile Device visit
www.microsoft.com/windowsmobile
or visit Banks website for direct links
and detail update instruction at
www.bankspower.com/iqupdate
2.
Install the Banks iQ Update Utility
on your computer by visiting www.
BanksPower.com/Downloads.
3.
Turn the Banks iQ on and allow it
to complete its booting process (about
a minute). In the ‘Mode Select’ menu
press on the ‘Productivity’ Mode. Then
press on ‘Desktop’ tab to open the
Windows desktop. For instruction on
how to access the Desktop refer to
Section 11
. Then plug the Banks iQ
into your Pc using the supplied USB
cable.
CaUTION: The iQ must be in the
the Windows desktop before
connecting the iQ to a PC. The iQ
will either ignore the connection
or register an error if the iQ is not
in the ‘Desktop’ mode.
4.
Start the Banks iQ Update Utility
and follow the on-screen directions on
your Pc to update your Bank iQ with
the latest software updates.
For more detail instruction to
update your Banks iQ please go to
www.bankspower.com/iqupdate.
-END, SEcTION 19-