Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- Banks iQ 2.0 Ford(03-10), Chevy(01-10), Dodge(03-07) User Manual
Page 23
96834 v.1.0
23
4.
Adjust the Power Level on the left
if desired.
5.
Press the ‘Start Test’ button.
NOTE: To ensure accuracy, the vehicle
must be completely stopped when
pressing the ‘Start Test’ button. After
pressing the ‘Start Test’ button, the
Banks iQ will immediately arm itself
and wait for vehicle motion to begin
recording.
6.
The “christmas Tree” Yellow Light
will flash.
7.
Test begins when Green Light
flashes on and accelerator pedal is
pushed.
NOTE: You can begin the test any time
after the ‘Start Test’ button is pressed
by pushing on accelerator pedal or
making the wheels roll.
Recommended Performance Test
Procedure:
A
.
Foot firmly on brake, vehicle at
rest, select drive gear.
B
.
Select the desired ‘Performance
Test’.
C
.
Press ‘Start Test’. Wait for green
light.
D
.
Test begins once vehicle motion
is detected.
8.
When the performance test is
finished, Banks iQ immediately displays
a results screen showing elapsed time/
speed/distance measurements along
with default gauge readings for the
run. See Figure 19. Each completed
Performance Test is saved for future
analysis. Exit the result screen and
return to the Performance Mode by
pressing the ‘X’ in the upper right-
hand corner.
Viewing Saved Performance Tests
9.
To view a previously completed
Performance Test touch the button
labeled ‘Recall Saved’.
10.
Use the Up and Down arrow
buttons to highlight the Performance
Test you want to review.
NOTE: All tests are date and time
stamped to conveniently help search
for the desired Test run.
11.
Touch the button labeled ‘Review
Test’ to view in detail the results of the
saved Performance Test.
Use the ‘Left’ and ‘Right’ arrow buttons
to move the cursor one frame at a time
in the displayed graph area. Moving
between the frames will automatically
update the displayed parameter values.
NOTE: Use of this feature will be
suspended while the vehicle is in motion.
Only when the Banks iQ senses that the
vehicle’s speed is zero can you review
your saved tests.
Deleting Saved Performance Tests
12.
To delete a previously saved
Performance Test, highlight the saved
test you wish to delete and Press the
‘Delete’ Button
13.
A pop up window labeled ‘confirm
Delete’ will ask you to confirm the
deletion of the test.
14.
Press the button labeled ‘Yes’ to
confirm or ‘No’ to decline.
15.
Press the Banks Home iQ icon to
return to the ‘Mode Select’ menu.
-END, SEcTION 9-