Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- Banks iQ 2.0 Ford(03-10), Chevy(01-10), Dodge(03-07) - Manual (Page 17)

96834 v.1.0
17
the ‘Adjustments’ menu. For more
description of the ‘Adjustments’ menu,
please see Section 18 .
For more information regarding the
Banks Power Tuner, please refer to
Section 6 .
The Safety and combo Power & Safety
screens have additional buttons that
allow you to choose your Braking
Mode. For more information, please
refer to Section 7 & 8 .
The combo Power & Safety screen
allows you to switch quickly between
Power and Safety Modes. For more
information, please refer to Section 8 .
-END, SEcTION 5-
Your Banks Power Tuner features
selectable power levels are 1 thru 6.
Level 1 is the vehicle’s stock power.
Level 2 is the EconoMind® setting,
specifically designed to improve fuel
economy. Level 3 thru 6 produce
incremental power increases along with
EconoMind features. The selection of
a power level can be done on-the-fly
while driving. A brief pause will occur
before the level changes. This is due to a
verification process inside the Tuner.
To increase power level, press the ‘Up’
arrow. To decrease the power level,
press the ‘Down’ arrow on the right side
of the screen. See Figure 12. Power
level is displayed in-between the arrows.
On the lower left hand corner of the
screen are the ‘Banks iQ Home’ icon,
which will direct you back to the ‘Mode
Select’ menu, and the ‘Wrench’ icon
that will direct you to the ‘Adjustments’
menu. For more description of the
‘Adjustments’ me nu, please see
Section 18 .
to prevent damage to the factory
transmission, Banks recommends
that automatic transmission vehicles
do not exceed level 4 with the Banks
iQ while the vehicle is experiencing
load (towing, climbing a steep grade,
carrying a load, etc.).
-END, SEcTION 6-
Section 6
POWER MODE
Figure 12 Power Screen