Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- Banks iQ 2.0 Ford(03-10), Chevy(01-10), Dodge(03-07) User Manual

Page 16

96834 v.1.0

Press the ‘Power’ button in the Mode

SELEcT screen to access the Tuner

and/or combo

Tuner/SpeedBrake.
Press the ‘Safety’ button on the

Mode SELEcT screen to access the

SpeedBrake and or combo Tuner/

SpeedBrake.
Power Mode, Safety Mode and combo

Power/Safety Screens all display the

following: five user-selectable Gauges,

Status Indicator, and Brake or Power

level. See Figure 11.
Press the Wrench icon to see the

‘Adjustments’ menu.
Select any five gauges that you

want to show on your display. To

change a gauge, simply press on it

and you will be taken to the ‘Gauge

Placement’ screen featuring the gauge

you selected. Refer to

Section 20

for instruction on how to change

each gauge. The gauges can also

be changed to display in English or

metric units. Refer to

Section 19

for

instruction on how to change units.
The Status Indicator in the upper right-

hand corner of the screen displays the

communication status between the

Banks iQ and Banks Power Tuner and/

or SpeedBrake. In the event that an

on-screen alert or Banks Power Tuner/

SpeedBrake malfunction is triggered,

a status alert will appear in the upper

right-hand corner of the screen. See

Figure 48. Press on the status alert

for more information about the alert

condition.
Below the Status indicator are the Up

and Down arrows. Press on the arrows

to increase or decrease Power level,

Brake strength, or target speed with

the corresponding change displayed in

between the arrows. Refer to

Section

6, 7, & 8

for instruction on use.

For ‘Braking’ or ‘Braking & Power’

Mode, the active device or mode will

be highlighted in red in the lower part

of the screen. Refer to

Section 7 & 8

for instruction on use.
On the lower left hand corner of

the screen is the ‘Banks iQ Home’

icon, which will direct you back to

the ‘Mode Select’ menu, and the

‘Wrench’ icon that will direct you to

Section 5

WORKING WITH POWER MODE, SaFETY MODE, aND COMBO

POWER/SaFETY SCREEN

Figure 11 Combo Tuner and Brake Screen Shown.