Banks Power Dodge Trucks: (Diesel ’03 - 07 5.9L Cummins) Tuner- Six-Gun Diesel Tuner (235, 250, 305 HP Dodge 5.9L Cummins (24-valve) Trucks) '03-04 For use with Six-Gun Switch - Manual (Page 4)

4
96448 v.12.0
THIS IS A HIGH PERFORMANCE
PRODUCT. USE AT YOUR OWN
RISK.
Do not use this product until you
have carefully read the following
agreement.
This sets forth the terms and
conditions for the use of this
product. The installation of this
product indicates that the BUYER
has read and understands this
agreement and accepts its terms
and conditions.
DISCLAIMER OF LIABILITY
Gale Banks Engineering Inc., and its
distributors, employees, and dealers
(hereafter “SELLER”) shall in no way
be responsible for the product’s
proper use and service. The BUYER
hereby waives all liability claims.
The BUYER acknowledges that he/
she is not relying on the SELLER’s
skill or judgment to select or furnish
goods suitable for any particular
purpose and that there are no
liabilities which extended beyond the
description on the face hereof and the
BUYER hereby waives all remedies or
liabilities, expressed or implied, arising
by law or otherwise, (including without
any obligations of the SELLER with
respect to fitness, merchantability,
and consequential damages) whether
or not occasioned by the SELLER’s
negligence.
The BUYER is responsible to fully
understand the capability and
limitations of his/her vehicle according
to manufacturer specifications
and agrees to hold the SELLER
harmless from any damage resulting
from the failure to adhere to such
specifications.
The SELLER disclaims any warranty
and expressly disclaims any liability
for personal injury or damages. The
BUYER acknowledges and agrees
that the disclaimer of any liability
for personal injury is a material term
for this agreement and the BUYER
aggress to indemnify the SELLER
and to hold the SELLER harmless
from any claim related to the item of
the equipment purchased. Under no
circumstances will the SELLER be
liable for any damages or expenses by
reason of the use or sale of any such
equipment.
The BUYER is responsible to obey
all applicable federal, state, and
local laws, statutes, and ordinances
when operating his/her vehicle, and
the BUYER agrees to hold SELLER
harmless from any violation thereof.
The SELLER assumes no liability
regarding the improper installation
or misapplication of its products. It is
the installer’s responsibility to check
for proper installation and if in doubt,
contact the manufacturer.
The BUYER is solely responsible for all
warranty issues from the automotive
manufacturer.
LIMITATION OF WARRANTY
Gale Banks Engineering Inc., (hereafter
“SELLER”) gives Limited Warranty as
to description, quality, merchantability,
fitness for any particular purpose,
productiveness, or any other matter of
SELLER’s product sold herewith. The
SELLER shall be in no way responsible
for the product’s open use and service
and the BUYER hereby waives all
rights except those expressly written
herein. This Warranty shall not be
extended or varied except by written
instrument signed by SELLER and
BUYER.
Disclaimer of Liability & Warranty