beautypg.com

Banks Power Chevy_GMC Trucks: Duramax LB7 (Diesel ’01 - 04 6.6L) Power Systems- PowerPack & Stinger Systems w_ EconoMind (LB7 & LLY) '01-05 (PDA) Compatible w_ Optional PowerPDA User Manual

Page 35

background image

Section 7 not needed if Banks

PowerPDA will be installed. Please

proceed to Section 8.
CAuTIoN: Do not use force

when working on plastic parts.

Permanent damage to the part

might result.

1.

The Power Level Selector switch

will be installed on the driver’s side

of the instrument panel (IP) next to

the steering column (see Figure

45). carefully remove the IP from

the dashboard by slowly pulling

outwards from the dashboard

around the edges of the IP, allowing

the mounting pins to pull free from

their dashboard sockets. Automatic

transmission equipped vehicles will

need to set the parking brake and

move the shift lever down to the

lowest gear to allow clearance for

instrument panel removal.

Section 7

INSTALLATIoN oF THE PoWER LEVEL SELECToR SWITCH

Figure 45

Figure 46 Power level selector switch template

96776 v.11.0

35