Rough Country 52531-15 - Manual (Page 4)

52531 4
Rev. E 0309
Step Three - without Door Side Rails
Locate the hook and loop strips sewn to the front corners of the
Bikini. Fasten the strips to each other and tuck them up above the
horizontal sport bar, out of the way.
Locate the flap sewn inside the Bikini above the door opening.
Wrap the inside and outside flaps around the horizontal sport bar
and fasten the Hook and Loop Strips to each other.
Note: When removing the Bikini, it will be
easiest to remove the plastic strips by
starting at the front of the plastic and pulling
down and out.
Locate Hook Strip between
Sport Bar and Door Side Rail
and fasten to Loop
Hook and Loop sewn inside fabric.
Wrap Flaps around bar and fasten
Hook and Loop to each other.
Fold Fabric from front
to back to Lay Flat
Plastic Strips sewn inside fabric.
Roll into channel in Door Side Rail.
Step Three - with Door Side Rails
Locate the hook and loop strips sewn to the front corners of the
Bikini. Tuck the hook strip between the horizontal sport bar and the
Door Side Rail.
Locate the plastic strip sewn along the edge of the outer flap,
above the door opening. Slip the plastic strip into the channel on
the Door Side Rail.
Fold the fabric insert from front to back, so that it lays flat on top of
the horizontal sport bar and wrap the outer loop strip around the
Door Side Rail and fasten it to the hook strip tucked inside of the rail
to hold the fabric in place.