Rough Country 268.20 - Manual (Page 7)

12. Secure the spacer in the mount and washer using the supplied 3/8 ” x 3 3/4” bolts and lock nuts. See Photo 7.
13. Reinstall the coil spring.
14. Install the brake line spacer as shown in
Photo 8 with the supplied 8mm x 65mm bolt and locking nut. Tighten with a
13mm socket/ wrench.
15. Install the supplied sleeves in the sway bar link and install on
the frame using the stock hardware.
16. Place the supplied washer on the head of the supplied
12mm x 65mm bolt and install on the sway bar with the nut
on the sway bar as shown in
Photo 9 using. Tighten using a
18mm & 19mm wrench.
17. Install the shock relocation bracket as shown in the factory
shock location with the supplied 5/8 ” x 1 1/2” bolt, washers
and lock nut on the bottom of the shock mount.
See Photo
10.
18. Install the supplied 14mm x 75mm bolt, washers and lock
nuts in the stock shock mount.
See Photo 11.
19. Install the tires/wheels.
20. Jack up the vehicle to remove the jack stands. Remove the
jack stands and lower the vehicle to the ground.
Photo 7 Photo 8
Photo 9
Photo 10 Photo 11