Rough Country 615.20 - Manual (Page 4)

THANK YOU FOR PURCHASING A ROUGH COUNTRY PRODUCT.
KIT CONTENTS
POST INSTALLATION INSTRUCTIONS
1. Check all fasteners for proper torque. Check to ensure there is adequate clearance between all rotating, mobile,
fixed and heated members. Check steering gear for interference and proper working order. Test brakes.
2. Perform steering sweep. Check to ensure brake hoses have sufficient slack and will not contact rotating, mobile, or
fixed members, adjust lines/brackets to eliminate interference and maintain proper working order. Failure to perform
inspections may result in component failure.
3. If larger tires (10% or larger than stock) are installed, speedometer recalibration is necessary.
4. Bump stops and extensions must be in place on all vehicles! Note: allowing suspension to over extend by
neglecting to install or maintain stops and extensions may cause serious damage to related components.
5. Re torque all fasteners after 500 miles. Visually inspect components and re torque fasteners during routine vehicle
service.
6. Using an certified alignment professional with experience in aligning lifted vehicles, get an alignment done to factory
specifications.
7. Readjust headlights to proper settings.