Rough Country 796 - Manual

JEEP JK HEAVY DUTY CROSSMEMBER
Thank you for choosing Rough Country for your suspension needs.
Rough Country recommends a certified technician install this system. In addition to these instructions, professional
knowledge of disassemble/reassembly procedures as well as post installation checks must be known. Attempts to install
this system without this knowledge and expertise may jeopardize the integrity and/or operating safety of the vehicle.
Please read instructions before beginning installation. Check the kit hardware against the parts list. Be sure you have all
needed parts and know where they go. Also please review tools needed list and make sure you have needed tools.
PRODUCT USE INFORMATION
Rough Country makes no claims regarding lifting devices and excludes any and all implied claims. We will not be re-
sponsible for any product that is altered.
If question exist we will be happy to answer any questions concerning the design, function, and correct use of our prod-
ucts by calling 1-800-222-7023.
This JK heavy duty cross member is designed to work with any JK with stock suspension, a short arm lift kit. This is a
bolt on cross member that helps protect the transmission and strengthens the frame rails.
Kit Picture
Tools Needed
16mm Socket
18mm Socket/Wrench
Jack
Install Instructions
1. Park the jeep on a flat level surface.
2. Using a 18mm socket remove the three bolts holding on the front skid plate. See Photo 1& 2.
92796000
Photo 1 Photo 2