Rough Country 723.20 User Manual
Rough Country For the car
2014 GM 2” FRONT & 4” REAR LOWERING KIT
Thank you for choosing Rough Country for all your suspension needs.
Rough Country recommends a certified technician install this system. In addition to these instructions, professional
knowledge of disassemble/reassembly procedures as well as post installation checks must be known. Attempts to install
this system without this knowledge and expertise may jeopardize the integrity and/or operating safety of the vehicle.
Please read instructions before beginning installation. Check the kit hardware against the kit contents list on the back
page. Be sure you have all needed parts and know where they go. Also please review tools needed list and make sure
you have the tools needed to install the kit.
PRODUCT USE INFORMATION
Generally, braking performance and capability are decreased when larger/heavier tires and wheels are used. Take this
into consideration while driving. Do not add, alter, or fabricate any factory or after-market parts to decrease vehicle
height over the intended height of the Rough Country product purchased. Mixing component brands is not recom-
mended.
Rough Country makes no claims regarding lowering devices and excludes any and all implied claims. We will not be re-
sponsible for any product that is altered.
**Note** The electric power steering must be unplugged before any steering components are removed. Failure not to do
so can cause damage to the electric power steering.
We will be happy to answer any questions concerning the design, function, and use of our products.
NOTICE TO DEALER AND VEHICLE OWNER
INSTALLING DEALER / OWNER - It is your responsibility to install the warning decal and forward these installation in-
structions on to the vehicle owner for review. These instructions should be kept in the vehicle for its service life.
92723200
Tools Needed:
24mm Wrench
22mm Wrench
21mm Wrench
18mm Wrench
15mm Wrench
13mm Wrench
12mm Wrench
10mm Wrench
8mm Allen Wrench
Drill Motor
Drill Bit 11/32
Drill Bit 15/32
Vise Grips
Die grinder
Floor Jack
Jack Stands