Rough Country 778 User Manual
Page 2
3. Hold the front skid into place and insert the supplied 3/8” bolt and washer into the flag nuts. Tighten with a 9/16”
wrench. See Photo 3.
4. Using a 13/32” drill bit and the skid as a drill guide, drill the four holes in the lower brace to hold the front skid. See
Photo 4.
5. Place the supplied flag nuts inside the lower brace. See Photo 5.
6. Use the supplied 3/8’ bolts, washers, and lock washers to attach the front skid to the brace. See Photo 6. Tighten
with a 9/16” socket.
PHOTO 3
PHOTO 4
PHOTO 5
PHOTO 6
Thank you for purchasing a Rough Country front skid plate.
See also other documents in the category Rough Country For the car:
- PERF689 (12 pages)
- 1308 (4 pages)
- 576.20 (16 pages)
- 1010 (4 pages)
- 787.22 (14 pages)
- 282 (14 pages)
- 1098 (1 page)
- 598S (17 pages)
- 379.22 (8 pages)
- 1051 (1 page)
- 392.24 (6 pages)
- 1109 (2 pages)
- 1011 (4 pages)
- 263.22 (9 pages)
- 7599 (4 pages)
- 1169 (2 pages)
- 87496 (4 pages)
- 288.20 (8 pages)
- 324S (20 pages)
- 283N2 (2 pages)
- PERF677 (8 pages)
- 699 (2 pages)
- 1305 (4 pages)
- 774S (10 pages)
- 1403 (2 pages)
- 9219 (2 pages)
- 1186 (1 page)
- 592.20 (8 pages)
- 1113 (2 pages)
- 563.20 (8 pages)
- 1054 (4 pages)
- 479.20 (8 pages)
- 87349 (2 pages)
- 280N2 (12 pages)
- 1021 (4 pages)
- RC0342 (2 pages)
- 3592 (2 pages)
- 1776 (1 page)
- 1182 (1 page)
- 1040 (2 pages)
- 561.20 (4 pages)
- 1117 (4 pages)
- 75113-15 (16 pages)
- PERF662X (8 pages)
- 1156 (2 pages)