Rough Country 1124 User Manual
Jeep jk rear bumper brackets
TOOLS NEEDED:
16mm Socket
KIT CONTENTS:
2-Inner brackets
1-Driver side bracket
1-Pass side bracket
92112400
JEEP JK REAR BUMPER BRACKETS
FOR USE WITH VEHICLES EQUIPPED WITH 1 1/4” BODY LIFT
Thank you for choosing Rough Country for your suspension needs.
This kit is for use with vehicles equipped with a 1 1/4” body lift to return the rear bumper to the stock loca-
tion.
In addition to these instructions, professional knowledge of disassemble/reassembly procedures as well as post in-
stallation checks must be known. Attempts to install this system without this knowledge and expertise may jeopard-
ize the integrity and/or operating safety of the vehicle.
Please read all the instructions before beginning the installa-
tion. Check the kit hardware against the kit contents. Be sure you have all the needed parts and understand where
they go. Also please review the tools needed list and make sure you have needed tools. If you have any questions
please call us at 800-222-7023.