Specifications – Panasonic WV-NF284 User Manual
Page 32
32
Specifications
General specification
Power source
AC 24 V or DC 12 V, PoE (IEEE802.3af compliant)
Power consumption
AC 24 V 60 Hz: 4.0 W, DC 12 V: 350 mA,
PoE: 4.0 W (Class 2 device)
Ambient temperature
–10 °C to +50 °C
Ambient humidity
90 % or less
Monitor output
(only for adjustment)
VBS: 1.0 V [P-P]/75
Ω,
composite, ø3.5 mm
mini jack
(monaural)
External I/O terminals
ALARM IN, ALARM OUT, AUX OUT (x1 each)
Audio
Captured by the built-in microphone
Dimensions
ø122 mm x 136 mm (H)
Weight
Approx. 640
g (including the camera mount bracket)
Camera
Image sensor
1/4 inch interline transfer CCD
Effective pixels
659 (H) x 494 (V)
Scanning area
3.59 mm (H) x 2.70 mm (V)
Scanning system
Progressive
Resolution
VGA: 640 x 480, QVGA: 320 x 240
Minimum illumination
1.5 lx (F1.4)
AGC
Always ON (fixed)
Electronic shutter
AUTO
Sensitivity up
OFF, x2AUTO, x4AUTO, x8AUTO, x16AUTO
White balance
AUTO/HOLD
Electronic Zoom
1x, 1.5x, 2x, 2.5x, 3x
VMD alarm
ON/OFF, 4 areas available
Aperture control
ALC (BLC ON/OFF)
ALC lens drive
DC drive
Lens type
3.6x variable focal lens
Focal length (f)
2.8 mm - 10 mm
Aperture ratio
1 : 1.3 (WIDE), 1 : 3.1 (TELE)
Angular field of view
Horizontal: 20.8 ° (TELE) – 73.5 ° (WIDE)
Vertical: 15.6 ° (TELE) – 54.4 ° (WIDE)
Adjusting angle
Horizontal: 180 ° (clockwise), 140 ° (counterclockwise)
Vertical: ±75 °, Image tilt adjustment range: ±100 °