beautypg.com

Notes, 9 adsl settings, 10 upnp settings – Velleman CAMIP7N User Manual

Page 18: 11 ddns service settings

background image

CAMIP7N

V. 04 – 23/09/2013

18

©Velleman nv

click on an on-screen button to activate the WPS feature. If you

are not sure where the WPS button is on your router, prease
refer to your Router‟s manual.

Notes

The camera will automatically create a secure wireless connection

to your router. If you have plugged in the network cable, please
plug it out. While connecting, the green network light on RJ45 will

blink and the wireless settings will take effect. The IP Camera Tool
will search the camera‟s LAN IP. Make sure the PC and the camera
share the same subnet.

During the WPS settings, you must press the RESET button only

for four seconds. When you press and hold down the RESET

button for 10 seconds the camera will be reset back to factory
default settings.

The security mode of router cannot be WEP, or else the WPS

settings may be failed.

11.9 ADSL Settings

When connected to the Internet directly via ADSL, check the

checkbox and enter the ADSL User name and ADSL password you
obtained from your Internet Service Provider (ISP).
11.10 UPnP Settings

Select the checkbox to use the Universal Plug and Play (UPnP)

protocol.
11.11 DDNS Service Settings
Free DDNS Service

The Dynamic DNS name will be something like:
a00000.myipcamera.org
Now you can use http:// Domain name + HTTP Port to access the

camera via internet.