2 viewing a channel in full-screen mode, 3 playing recorded video clips, Push video configuration – Velleman NVR2 User Manual
Page 9: 1 configuring the wan port
NVR2
V. 01 – 04/03/2013
9
©Velleman nv
10.2 Viewing a Channel in Full-Screen Mode
To view a channel in full screen mode, you can:
Click directly on the channel image to see that channel in full screen mode. Double-click the image to
restore the previous overview.
In the quick operation panel [18], click
. On the control panel that appears, select the channel you
want to display in full screen mode. Click
to restore the previous overview.
10.3 Playing Recorded Video Clips
1. Make sure that manual and/or event recording is enabled: in the main menu [19], click
(ADVANCED
CONFIG) and select RECORD to check or adjust the settings.
2. In the playback panel [20], press the play button
. The recorded files are shown.
3. The fast forward
and fast rewind
buttons increase/decrease the playback speed. Press the button
repeatedly to increase/decrease the speed to 4x, 8x, 16x, or 32x (max.).
4. Press the pause button
to pause playback.
5. Press the stop button
to stop playback and return to live monitoring.
11. Push Video configuration
11.1 Configuring the WAN port
1. Make sure the NVR is properly connected to the router with a RJ45 network cable.
2. From your NVR, select (ADVANCED CONFIG), and select “Network” “WAN”.