Milton CAT S45 - Manual (Page 2)

S
TM
-40 & S
TM
-45
SELF-PROPELLED TELESCOPIC BOOMS
S40 3.5K 0109L. Part No. 109367
PLATFORM OPTIONS
• Steel 8 ft (2.44 m) (standard)
• Steel 6 ft (1.83 m)
• Steel 6 or 8 ft (1.83 or 2.44 m)
tri-entry
• Steel 4 ft (1.22 m)**
• Steel 5 ft (1.52 m)**
JIB OPTIONS
• Non-jib
• 5 ft (1.52 m) jib boom
POWER OPTIONS
• Ford gas/LPG 75 hp (56 kW)
• Deutz diesel 46 hp (34.3 kW)
• Perkins diesel 51 hp (38 kW)
DRIVE OPTIONS
• 2WD
• 4WD
AXLE OPTIONS
• Active oscillation
• Non-oscillating
TIRE OPTIONS
• Rough terrain air-filled (standard)
• Rough terrain foam-filled
• Rough terrain non-marking
air or foam-filled
• High flotation air-filled
• Sealant treated air-filled
EASILY CONFIGURED TO MEET
YOUR NEEDS
PRODUCTIVITY
• Platform swing gate
• Half-mesh platform inserts with swing gate
• Platform top auxiliary rail
• Arc Pro 275
™ Heavy-Duty Welder package
• Welder Ready package
• Weld leads to platform
• Air line to platform
• Hydraulic oil cooler
• Fire resistant hydraulic oil
• Biodegradable hydraulic oil
• Basic hostile environment kit
• Deluxe hostile environment kit
• Deluxe aircraft protection package
(6 ft platform only)
• Thumb rocker steer
• Tool tray
• Fluorescent tube caddy
• Pipe cradle (pair)
• Alarm package
• Panel cradle package*
• Platform work lights
• Front driving lights
• Lockable platform control box covers
• Tow package
POWER
• Engine gauge package
• AC generator packages (110V/60Hz,
3000W or 220V/50Hz, 2500W)
• Cold Weather Packages
• Arctic Packages
• Diesel scrubber/spark arrestor muffler
• LPG tank 33.5 lb (15.19 kg) capacity
• Additional LPG tank with carrier
• Retained key selector switch
OPTIONS & ACCESSORIES
Features
MEASUREMENTS
S™-40
• 46 ft (14.20 m) working height
• 31 ft 8 in (9.65 m) horizontal reach
• Up to 500 lb (227 kg) lift capacity
S™-45
• 51 ft (15.72 m) working height
• 36 ft 8 in (11.18 m) horizontal reach
• Up to 500 lb (227 kg) lift capacity
PRODUCTIVITY
• Self-leveling platform
• Hydraulic platform rotation
• Fully proportional Hall effect
joystick controls
• Fuel select switch on platform
and ground control panels
(Gas/LPG models)
• Drive enable
• AC power cord to platform
• Tilt alarm
• Descent alarm
• Horn
• Hour meter
• 360° continuous turntable rotation
• Locking, low profile turntable covers
• Positive traction drive
• Two speed wheel motors
POWER
• All engines are emissions compliant
• 12 V DC auxiliary power
• Anti-restart engine protection
• Auto engine fault shutdown
• Intake air heater (Deutz engine)
STANDARD FEATURES
145
www.genieindustries.com
Effective Date: January, 2009. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s
Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable
to our equipment is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex
Corporation, Genie Industries, Inc. and/or their subsidiaries in the U.S.A. and many other countries and all rights are reserved. Terex is a Registered Trademark of Terex Corporation in the U.S.A. and many other countries. Genie is a Registered
Trademark of Genie Industries, Inc. in the U.S.A. and many other countries. Genie is a Terex Company. © 2009 Terex Corporation.
Genie United States
18340 NE 76th Street
P.O. Box 97030
Redmond, Washington 98073-9730
Telephone
+1 (425) 881-1800
Toll Free in USA/Canada +1 (800) 536-1800
Fax +1 (425) 883-3475
Genie Europe
Millennium House
Brunel Drive
Newark NG24 2DE
UK
Telephone
+44 (0)1476 584333
Fax +44 (0)1476 584334
Email: [email protected]
Distributed By:
* Available on select models
** Not available on CE machines