Milton CAT 305.5E CR - Manual (Page 10)

Simple Dozer Control with Float Function
The dozer function is pilot controlled from inside
the cab, providing smooth, proportional operation.
The standard float function is enabled by pushing
the lever fully forward into the detent position.
Cleanup and backfilling is easier since the
operator does not have to adjust the blade height
during travel.
Dozer Blade
Maximize your productivity
Excellent Blade Visibility
Visibility to the blade is excellent in any position, allowing the
blade to be positioned behind the operator and away from the
front linkage for better access when back dragging and finishing
in tight areas.
Angle Blade Option
Increase machine versatility with the Cat angle dozer blade.
Built for strength and durability, the hydraulic angle blade features
a hardened steel wear edge and good protection to cylinders
and hydraulic lines. The angle blade can be positioned straight
ahead or angled up to 25 degrees to the left or right. This reduces
the number of times required to back up and reposition when
backfilling so you can finish the job faster. All functions of the blade
are controlled with one joystick using a proportional roller switch
for the angle function.
10