Milton CAT 966K - Manual (Page 14)

966K Wheel Loader Specifi cations
Engine Operating Specifications Hydraulic System
Engine Model Cat ® C9.3 ACERT™
Max. Gross Power
(1,800 rpm) –
SAE J1995 222 kW 296 hp
Max. Net Power
(1,800 rpm) –
ISO 9249 199 kW 267 hp
Max. Net Power
(1,800 rpm) –
SAE J1349 199 kW 267 hp
Max. Net Power
(1,800 rpm) –
EEC 80/1269 199 kW 267 hp
Peak Gross Torque
(1,400 rpm) –
SAE J1995 1364 N·m 1,006 ft­lb
Peak Net Torque 1274 N·m 940 ft­lb
Static Tipping Load
Full 37° Turn – 14 636 kg 32,259 lb
ISO 14397­1*
Static Tipping Load
Full 37° Turn – 15 828 kg 34,886 lb
Rigid Tires**
Breakout Force 173 kN 38,984 lb
• For 4.2 m 3 (5.5 yd 3 ) general purpose
buckets with BOCE.
* Full compliance to ISO (2007) 14397­1
Sections 1 thru 6, which requires 2%
verification between calculations and
testing.
** Compliance to ISO (2007) 14397­1
Sections 1 thru 5.
Transmission
Steering System Piston
Pump Type
Implement System – 340 L/min 90 gal/min
Maximum Pump
Output (2,275 rpm)
Implement System – 31 000 kPa 4,496 psi
Maximum Operating
Pressure
Implement System – 300 L/min 79.3 gal/
Optional 3rd Function
min
Maximum Flow
Implement System – 20 700 kPa 3,000 psi
Optional 3rd Function
Maximum Pressure
Hydraulic Cycle 5.9 Seconds
Time – Raise from
Carry Position
(1,400 rpm) –
SAE J1349
Bore 115 mm 4.5 in
Stroke 149 mm 5.9 in
Displacement 9.3 L 568 in 3
• Caterpillar engine with ACERT Technology –
meets Tier 4 Interim/Stage IIIB emission
standards.
Weights
Operating Weight 24 189 kg 53,311 lb
• For 4.2 m 3 (5.5 yd 3 ) general purpose buckets
with BOCE.
Forward 1 6.7 km/h 4.2 mph
Forward 2 12.6 km/h 7.8 mph
Forward 3 22.4 km/h 13.9 mph
Forward 4 37.4 km/h 23.2 mph
Reverse 1 7.8 km/h 4.9 mph
Reverse 2 13.7 km/h 8.5 mph
Reverse 3 23.5 km/h 14.6 mph
Reverse 4 38.5 km/h 23.9 mph
• Maximum travel speed in standard vehicle
with empty bucket and standard L3 tires
with 826 mm (33 in) roll radius.
Hydraulic Cycle
Time – Dump, at
Maximum Raise 1.5 Seconds
Hydraulic Cycle
Time – Lower,
Empty, Float Down 2.4 Seconds
Hydraulic Cycle
Time – Total
9.8 Seconds
• Cycle time with rated payload.
Brakes
Brakes Meet OSHA,
SAE J1473 OCT90
and ISO 3450­1985
Buckets
required standards
Bucket Capacities 2.50 m 3 ­
9.20 m 3
3.25 yd 3 ­
12.00 yd 3
• Refer to bucket selection chart.
14